Manufacturer Replace Atlas Copco Screw Compressor Air Oil Separator
Failures and treatment methods of the air-oil separator of the air compressor:
- The exhaust temperature is too high.
Possible cause/removal method, the oil level in the air oil separator is too low/check the oil level, add oil if necessary
- Exhaust pressure is too high (Oil separator tank pressure)
Possible cause/elimination method: blockage of the air oil separator/replace the air oil separator;
- The air supply pressure is lower than the rated exhaust pressure
Possible cause/elimination method: The filter element of the air oil separator is blocked/check and replace
- Excessive oil consumption
Possible cause/removal method: The filter element or gasket of the air oil separator is damaged. Check whether the filter element and gasket are damaged and must be replaced.
| Part No. | 1631050200 |
| Filtration efficiency | 98% |
| Working Life | ﹥4000H |
| Filter Material | HV Filter |
| Residual Oil | ＜3PPM |
| Application | Mark RMC 30 from 2012 |
| Mark RMC 45 |
| Ceccato CSC 40 from s/n AP100000 |
| Ceccato CSC 40 IVR from s/n AP100000 |
| Ceccato CSC 50 from s/n AP100000 |
| Ceccato CSC 50 IVR from s/n AP100000 |
| Ceccato CSC 60 from s/n AP100000 |
| Ceccato CSC 60 IVR from s/n AP100000 |
Features
1. Low pressure drop and energy saving
2. High quality filtration media
3. Low oil consumption
4. Reliable and stable
5. Compact design
6. Long life span
Notes for air oil separator:
- The air oil separator can only be replaced, not cleaned;
- Do not connect the filter with a flange.
- The oil return pipe must be inserted into the bottom of the filter to avoid affecting the oil return.
AIR OIL SEPARATOR — SEPARATES THE OIL FROM THE COMPRESSED AIR
Product Tags:
|
|
Manufacturer Alternative Atlas Copco Screw Compressor Air Oil Separator Images
|
